Veteran Yacht Sales
Boat Highlights:
Year of Vessel
2009
Fuel Type
DIESEL
Length
36 ft
Brand
Farr
Condition
Pre-owned
Boat Type
Power
This 2009 Farr 11S, Built in Dubai by Premier Composite Technologies is Ready For The Next Starting Line.
MORE PHOTOS COMING SOON
The Farr 11s has a 45-degree canting keel, twin asymmetric canards and twin retractable rudders on a hull with high form stability. The rig is a transplant from skiff rig development with a large square-headed main on a highly swept spreader, no backstay rig. The concept should provide some automatic de powering, and minimize demands on the crew during maneuvers to leave hands available for canard operation, keel activation and sail handling. The retractable bowsprit stretches the sail plan to allow ample downwind sail area in the form of asymmetric spinnakers.
24V distribution/circuit breaker panel
4, 12V AGM batteries in box for the hydraulic power supply
1 Engine start battery
2, 12V AGM batteries for a separate 12V system for the keel control system
Hydraulic electronic controller
Hydraulic/electrical distribution system
Bilge pump
Running lights, 24V
Construction:
Male hull mold and female deck mold
Carbon fiber w/PVC foam core
Epoxy resin with carbon pre-preg, cured in an autoclave
Interior structure carbon fiber
Hull & Deck AwlGrip paint finish (white)
Cove Stripe (Yellow)
Mechanical:
Yanmar 1GM10 inboard diesel
Retracting drive strut with 2 blade geared prop. The retracting prop was modified in 2012 to
enable the prop to be retracted without having to align the prop in a vertical position.
Engine panel mounted below companion way. Key, start switch, tachometer and alarm.
Interlock switch on the retracting prop
Spinlock single lever throttle/shift control
40L fuel tank
Electric and mechanical bilge pumps
Electrical:
24V distribution/circuit breaker panel
4, 12V AGM batteries in box for the hydraulic power supply
1 Engine start battery
2, 12V AGM batteries for a separate 12V system for the keel control system
Hydraulic electronic controller
Hydraulic/electrical distribution system
Bilge pump
Running lights, 24V
Interior
Interior AwlGrip finished in service areas
2, adjustable pipe berths aft P & S
Marine porta-potty
Bladder water tank
Hand-operated delivery system for water
Carbon Fiber galley basin
Stainless steel gimbaled 2-ring camping stove
Red and White cabin lights
Hardware
Spinlock stoppers and organizers
Bow pulpit
Stern pushpits
Stanchions
S/S lifeline wires
8, Harken winches, all are two speed self-tailing:
2, #44 each for Main sheet, jib/spin sheet, halyards
2, #20 winches for running backstays
All Harken blocks and hardware
File No. W2035
Upgraded Harken jib tracks with separate up and in haulers
Upgraded Main traveler track with main sheet car lines lead to just forward of the main sheet
winches
Rudder/Steering/Dagger Boards
Carbon stock inside foam and carbon blade
Mounted through hull with bearings
Under deck steering quadrant and linkage
Lengthened carbon fiber tiller
Tiller extension
Asymmetrical lifting dagger boards
Carbon fiber adjustable lifting struts
2:1 lifting purchase lead to a winch
Keel
CNC machined carbon/foam keel fin
Female molded fin blade
Machined lead keel bulb
Keel removable for trailering
45 degrees of keel canting P & S, 90 degrees total
Spars
Hall Carbon Fiber Mast, Spreaders, Boom
Carbon retractable sprit
Nitronic rod rigging
Internal hydraulic mast jack
Carbo foil headstay
Hall Quick Vang
New England Ropes low stretch running rigging,
Carbon Instrument Bracket
Sail Inventory:
Square Top Main 3DL Carbon North
J1 Kevlar/Carbon laminate North Sails practice sail
J2 3DL North Sails practice sail
J2 Carbon Laminate North race
J4 Kevlar Laminate North race
A1.5
A3
Veteran Yacht Sales is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Southpaw Yacht Sales. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey direct representation of a particular vessel
SPECIFICATION
Other listings from same broker
